Serioux SRX-WR150WH Guia do Utilizador

SRX-WR150WH

4. CONNECTING TO INTERNET This chapter introduces how to configure the basic functions of your router to access Internet. 4.1 Acces

4.2 Changing Password First, we recommend that you change the password to protect the security of your router. Please go to Management—Password ch

4.3 Setup Wizard Setup Wizard is provided as part of the web configuration utility. Users can simply follow the step-by-step process to get the Wirele

4.3.1.1 Dynamic IP Address If you choose Dynamic IP Address, you will get a dynamic IP address from your ISP automatically. Click Next

4.3.1.3 PPPoE Point-to-Point Protocol over Ethernet (PPPoE) is a virtual private and secure connection between two systems that enables e

5. ADVANCED SETTINGS This chapter allows users to configure advanced settings includes Wireless, Network Settings, Fire

WAN MAC Address: displays the MAC address of the WAN interface. Connection: displays the connection type of the WAN port. IP Address: shows the IP add

MTU: It means Max Transmit Unit for packet. When using slow links, large packets can cause some delays thereby increasing lag and latency. T

Starting IP Address: displays the start IP Address of the range that will be assigned to each computer connected with the router. Ending IP Address: d

5.2.4 TCP/IP Status This page displays the LAN and WAN interface settings of this router. Please see below: 5.3 Wireless 5.3.1 Wireless Status This pa

5.3.2 Wireless Basic Settings On this page, you could configure the parameters for Wireless LAN clients that may connect to your Access P

5.3.3 Wireless Security Settings This page enables you to set wireless security method that control how the subscriber station associates

Authentication Type: filed relates only to the WEP security option. One of the following authentication modes should be selected if WEP security meth

IP Address: enter the IP address of RADIUS server. Port: the UDP port number that the RADIUS server that is used to authenticate the messages sent be

Key, either 8~63 ASCII characters, such as 012345678..(or 64 Hexadecimal digits leading by 0x, such as “0x321253abcde…”). Key Renewal Method: you can

5.3.5 WPS Configuration Setup WPS (Wi-Fi Protected Setup) provides easy procedure to make network connection between wireless station and wire

5.3.6 Repeater Settings Network Name (SSID): if you set this router as an AP-client, you need to define the Wireless Name. BSSID: Bas

25BG Protection Mode: Background Protection Mode, by default, it is Auto selected. Basic Data Rates: you can choose the wireless data rate. This ro

20/40 BssCoexSupport: by default, it is enabled. Support 20/40 at the same time. IGMP Snooping: if you enable this function, multicast traffic w

firewall of this router helps to protect your local network against attack from unauthorized outsiders. It also restricts users in the local network f

1TABLE OF CONTENTS 1. ABOUT THIS GUIDE...3 1.1 Na

5.4.2 IP/Port Filtering Depending on whether there is an existing Internet connection, or in other words “the WAN link status is up or down”. You can

This router allows you to disable MAC Filtering function or allow/deny MAC address listed. MAC Name: the name of the computer with the MAC you entered

Enable/Disable: you can choose to enable or disable this function. Name: please enter the name of the defined network application/service. Trigger

5.4.7 DMZ DMZ means Demilitarized Zone. It can be enabled and used as a place where services can be placed such as Web Servers, Proxy Servers and E-ma

5.5.2 DDNS DDNS means Dynamic Domain Name System. The ISP often provides you with a dynamic IP address when you connect to the Internet via your ISP.

5.5.3 Time Zone Settings This page allows you to maintain the system time by synchronizing with a public time server over the Internet. Local Time: it

5.5.4 System Log This page can be used to set remote log server and show the system log. Click Log Settings button, it will display the page below:

5.5.5 Upgrade Firmware This page allows you to upgrade the Access Point firmware to new version. Please note, DO NOT power off the device during the

5.5.7 Password This page allows you to change the password to login web interface of this router. Also you can enable or disable the Remote Manageme

5.3.6 Repeater Settings ... 24

31. ABOUT THIS GUIDE Thank you very much for purchasing this Wireless Router. This guide will introduce the features of th

2.3 Panel Layout 2.3.1 Front Panel The front panel of the Router consists of 8 LEDs, which is designed to indicate connection status. POWERThis indica

2.3.2 Rear Panel The figure below shows the rear panel of the router. DC IN The Power socket is where you will connect the power adapter. RST: Wit

63. HARDWARE INSTALLATION 3.1 Hardware Installation For those computers you wish to connect with Internet by this router, each of t

If the result displayed is similar to that shown in above figure, it means that the connection between your PC and the Router has been established.